lexmark c510 user manual

Summary of the content on the page.
Prepare the printer 15).
This information is also available, in a printable format, on the publications CD that shipped with your printer.1 Pull the front door release latch forward and gently lower the front door.Warranty and details concerning the maintenance of the product.Toner cartridges must remain in their original order; they are not interchangeable in the slots.Important note - be sure to read repair crack in vinyl dash the Lexmark C510 at least once.Operation is subject to the following two international, INC., provides this publication AS IS conditions: without warranty OF ANY kind, either express OR implied, (1) this device may not cause harmful interference, and.It is good to get acquainted with it to avoid disappointments resulting from a shorter exploitation time of the product Lexmark C510 than expected.19 3 Align the other bracket with the hole on the left side of the printer as shown.This will help you maintain order in your home base of manuals.
Rub firmly to transfer the overlay labels.
If you do not want to read brochures every time concerning a Lexmark C510 or other products, it is enough to read them once only - just after buying the device.
The side cover is flat on the bottom.
28 Loading the trays.29 Step 8: Attach cables.Power requirements and energy class, information concerning the amount of energy used as well as recommendations regarding the installation and supply for Lexmark C510.4 Getting ready for setup.4 Step 2: Install printer supplies.Many instructions, immediately after the purchase, go into the trash along with the box, which is a mistake.Warning: Do not touch the shiny photoconductor film on the photodeveloper cartridge.On both sides, and place it on the table or optional drawer.Choose a firm, level (23.) 20 cm surface away from direct airflow and (8.) temperature extremes.12 4 Hold the cartridge level, and gently shake it to distribute the toner.To avoid damaging it, do not remove its packaging until you are ready to install.